Eclairage conventionnel

Baikowski® has been a world leader for more than 30 years in specialty chemicals for conventional lighting, also known as HPS lamps, fluorescent lighting tubes, and more. We provide alpha alumina and phosphors to enhance their efficiency.

Demander plus d'informations

What material for conventional lighting?

PCA (PolyCrystalline Alumina) are also designated as translucent ceramics, which can be found shaped in tubes in the conventional lighting systems. Their role is to maximize the light transmittance (Ultraviolet, Infrared or visible light) while resisting to high temperatures and pressures. Those pieces are made of alpha alumina like CR or TCP.

HID Lamps (High Intensity Discharge lamps) refer to light sources created from a current passing through a gas contained in a PCA tube. The HID family includes Mercury vapor, Metal Halide, High Pressure Sodium (HPS), Xenon Metal Halide (XMH), Xenon short-arc lamps & Carbon Arc lamps.

A Fluorescent Lighting Tube is made of a glass tube, filled with argon and traces of mercury. The tungsten electrodes on both sides of the tube spread a current that turns into UV radiation in contact with the gas. The inside of the tube is coated with a mix of phosphors in order to convert this UV radiation into visible light and high purity alumina to reflect the residual UV light.


PCA has remarkable properties in conventional lighting applications:

  • High transmittance of visible light, often requiring a warm, orange glow.
  • Efficient diffusion properties; the light must diffuse in every direction with the same intensity.
  • Thermal resistance: PCA ceramics are stable at temperatures up to 1,600°C. In comparison, glass is already reacting at 550°C.
  • High pressure resistance. Indeed, increasing the pressure in Sodium lamps is known to boost the efficiency of the lamp and improve the color rendering. The use of performing PCA made the fabrication of High Pression Sodium lamps (HPS) possible.

Baikowski® powders are optimized for optical functions in the final ceramics, as we control the purity, the size of particles & formulation for sintering process to ensure the highest density ceramic parts. Moreover, we can dope our products on request in order to add intended properties for your final ceramic parts.
Highly crystallized alumina has been proving its optimal UV reflection ability over the years of lighting evolution. Baikowski® powders are optimized for reflection properties as we control the chemical purity as well as the crystallographic purity.


PCA and UV reflection coatings appear in:

  • High intensity discharge (HID) lamps, such as High-Pressure Sodium (HPS) lamps
  • Fluorescent lighting tubes

Those technologies are mainly used in:

  • Public lighting
  • Horticulture

Processability of Baikowski® powders

We provide powders for PCA and UV coating. Our powders adapt easily to the customer process:

  • Extrusion; Baikowski® provides products with an optimal compromise between density and shrinkage of the intermediate ceramic green bodies.
  • Hot Pressing & HIP (Hot Isostatic Pressing)
  • Injection Molding, first step to make feedstocks
  • Casting
  • Coating; Our products, like CR, allow easy one-step deposition of UV reflection coating inside tube lamps, thanks to very low impact on the viscosity of the slurry.

View related products

Mot de passe oublié

A message will be sent to your email address.