Solutions de polissage

Brochures Alumine Haute Pureté

Téléchargez nos brochures Alumine Haute pureté qui vous aideront à trouver le produit...

See this product

BA – 4N alumina nanosized unground powder range

BA15, BA20, BA100 & BA105 products offer good control of the specific area and of the α or γ crystalline phase.

See this product

BA15-PSS – Ready-to-use 4N α alumina slurry

BA15-PSS - Ready-to-use α 4N alumina slurry

See this product

BMA15 – 4N α alumina nanosized milled powder

This deagglomerated powder is also suitable for dip coating & slip...

See this product

BRA105 – 4N 93% γ alumina milled powder

This deagglomerated powder can contain upon request 0,1% to 12% of...

See this product

CR – 4N alumina milled powder range

CR1, CR6, CR10, CR15, CR30F, CR125, CRA6 milled powders offer...

See this product

CR-S 4N alumina slurry series for polishing

CR slurries provides scratch-free finish.

See this product

GE – 4N α alumina unground powder range

GE1, GE6, GE15, GE30 & GEA6 are unground prowders that provide controlled specific surface area.

See this product

GE-S – 4N alumina slurry series for polishing

GE slurries are formulated from our GE 4N powders and provide a standard finish.

See this product

LS – 3N α alumina milled powder

LSDBM is a ball-mill deagglomerated powder particulary adapted for...

See this product

PA- 3N α alumina unground powder

PA alumina is particularly adapted to create polishing pastes.

See this product

PB – 3N α alumina nanosized powders in various forms

Unground, jet milled or ball milled powders accordindg to your technical ceramic needs

See this product

SA – 4N α alumina milled powder range

SA products are jet milled (-CR) & ball milled (-DBM) powders for...

See this product

ALN-6L – AIN substrate polishing slurry

We developed ALN-6L to deliver the best surface finish on AlN substrates without void defect.

See this product

HK

HK Series of Diamond Slurry is optimized for lapping GaN and SiC wafer.

See this product

PuBS – Pads

Baikowski® offers a wide range of polishing pads which are optimized for various applications such as sapphire,...

See this product

SLT-50

SLT-50 slurry was developed for polishing Lithium Tantalate (LiTaO3) wafers, commonly used for SAW devices.

See this product

SPH

SPH series was developed to improve productivity in sapphire polishing.

See this product

YG-1

YG-1 slurry offers a highly precise control of roughness, flatness and critical angles during YAG polishing.

See this product